Medium-Duty Archives • All Star Garage Door 901-240-7215 Garage Door & Spring Repair https://garage-door-repair-memphis.com/product-tag/medium-duty/ Garage Doors for your Home or Business Tue, 02 Jun 2020 14:31:10 +0000 en-US hourly 1 LiftMaster Opener MT https://garage-door-repair-memphis.com/shop/commercial/operators-commercial/opener-lmmt/ Wed, 20 Sep 2017 20:24:28 +0000 http://garage-door-repair-memphis.com/?post_type=product&p=16396 Trolley Operator

Medium duty, for Standard Lift Sectional Doors

The post LiftMaster Opener MT appeared first on All Star Garage Door 901-240-7215 Garage Door & Spring Repair.

]]> Medium Duty Trolley Operator for Standard Lift Sectional Doors

Model MT is a Medium-Duty Logic trolley operator for standard lift sectional doors.

It features a high-starting torque motor, a compact design, quick-gliding rail spacers and a quick-mount swivel header bracket.

  • UL325-2010 compliant Medium-Duty Logic programmable integrated circuit board
  • Built-in 3-channel, 315MHz radio receiver accepts up to 20 Chamberlain® Security+® or unlimited DIP switch remotes.
  • 3-button remotes can be programmed for OPEN/CLOSE/STOP operation
  • Programmable C2 or B2 wiring options (B2 requires CPS-U, CPS-UN4, or CPS-EI)
  • Integrated Timer-to-Close (TTC) allows programming from 5 to 60 seconds in 5-second increments. Allows for timed automatic door closure after the door reaches the full open position (Requires monitored safety devices, with CPS-U, CPS-UN4, or CPS-EI)
  • Integrated 90-second maximum run timer
  • UL325-2010 Monitored Entrapment Capability
  • Monitored protection against transient overvoltage conditions
  • 3-button control station included
  • Motor: Powerful 1/2 HP, single phase motor with instant reverse and internal automatic reset thermal overload. Removable without affecting limit switch settings.
  • Auxiliary Reversal System: Designed to protect the door and door operator from damage; if a closing door strikes an obstruction, the Auxiliary Reversal System will detect the slip of the clutch and reverse the door to the full open position. This system is not a substitute for a safety sensing device such as a photo cell or reversing edge.
  • Wiring Type: All operators are factory preset to C2 wiring providing momentary contact to open and stop, with constant contact to close. Momentary contact to close (B2 wiring) can be easily set, but requires the presence of either CPS-U, CPS-UN4, or CPS-EI safety devices. The operator is pre-wired to accept a sensing device, photoelectric control, radio controls and most types of access control equipment.
  • Rail Assembly: High strength dual L-rail track with exclusive nylon quiet gliding chain guides on rail spacers for quiet, smooth operation. Includes quick-mount header bracket which provides fast, swing-up installation.
  • Operator/Motor Control: Solid-state Medium-Duty circuit board.
  • Control Circuit: 24V NEC Class 2.
  • Drive Reduction: First stage heavy-duty 4L V-belt; second and third stages #48 chain; output on trolley #48 chain.
  • Emergency Disconnect: Spring-loaded disconnect for emergency manual operation.
  • Push Button Station: 3-button station for OPEN/CLOSE/STOP functions is standard for all operators. Controls with 1, 2 and 3 buttons are available.
  • Construction: NEMA 1 type electrical box, heavy-duty 11-gauge steel frame with baked-on powder coat finish, all reduction sprockets drilled and pinned to shafts.
  • Bearings: Heavy-duty, oil filled bearings.
  • Radio Receiver: 315MHz radio receiver is integral to the Medium-Duty logic board. Accepts up to 20 Security+® remote controls and unlimited DIP switch remote controls.
  • Friction Clutch: Adjustable friction clutch helps protect against damage to the door and operator should the door meet an obstruction. Works in conjunction with the Auxiliary Reversal System.
  • Warranty: 2-year warranty.
  • Primary Monitored Entrapment Protection: The presence of primary entrapment protection is required for all modes and features beyond basic constant-pressure-to-close performance. Primary entrapment protection devices are monitored continuously to insure safe operation of the door and limit door operator functionality should an obstruction be detected or in the event of device failure. LiftMaster Monitored Entrapment Protection devices, CPS-U, CPS-UN4 and CPS-EI, are designed to work in conjunction with LiftMaster commercial door operators to provide enhanced door safety and a broad range of modes and features to end users. Either monitored photo-sensor or monitored 4-wire sensing edge (in conjunction with the CPS-EI Edge Interface) protection may be selected, but one must be detected by the LiftMaster Logic 4.0 or Medium-Duty Logic circuit board in order to unlock full functionality.
  • Ancillary Entrapment Protection: (optional) LiftMaster Retro-Reflective Commercial Protector System® photo sensors, 2-wire non-monitored sensing edges and pneumatic sensing edges are considered secondary entrapment protection and may be used to supplement primary entrapment protection or basic constant-pressure-to-close.
  • Solenoid Brake: Solenoid actuated brake prevents coasting. Order operator BMT. Standard on 3/4 HP and higher.
  • Auto-Reconnect Trolley Assembly: Spring-loaded trolley features nylon inserts for quiet operation and auto-reconnect feature eliminating the need to manually reattach the door arm to the trolley after emergency disconnect.
  • Radio Control: Universal transmitters and receivers are available to signal the operator to open and/or close.
  • Key Switch: Designed to restrict operation of door to authorized personnel only. Various types available.
  • Interlock Switch: Prevents accidental operation of the door by interrupting the control circuit

 

The post LiftMaster Opener MT appeared first on All Star Garage Door 901-240-7215 Garage Door & Spring Repair.

]]> LiftMaster Opener MJ https://garage-door-repair-memphis.com/shop/commercial/operators-commercial/opener-lmmj/ Wed, 20 Sep 2017 20:09:28 +0000 http://garage-door-repair-memphis.com/?post_type=product&p=16394 Hoist Operator

Medium-Duty, for Rolling Sheet Doors

The post LiftMaster Opener MJ appeared first on All Star Garage Door 901-240-7215 Garage Door & Spring Repair.

]]> Model MJ is a Medium Duty Logic jackshaft operator.

It features a compact design, an adjustable friction clutch, a standard solenoid brake and a high-starting torque motor.

  • UL325-2010 compliant Medium-Duty Logic programmable integrated circuit board
  • Built-in 3-channel, 315MHz radio receiver accepts up to 20 Chamberlain® Security+® or unlimited DIP switch remotes. 3-button remotes can be programmed for OPEN/CLOSE/STOP operation
  • Programmable C2 or B2 wiring options (B2 requires CPS-U, CPS-UN4, or CPS-EI)
  • Integrated timer-to-close (TTC) allows programming from 5 to 60 seconds in 5-second increments. Allows for timed automatic door closure after the door reaches the full open position (Requires monitored safety devices, with CPS-U, CPS-UN4, or CPS-EI)
  • Integrated 90-second maximum run timer
  • UL325-2010 Monitored Entrapment capability
  • Monitored protection against transient overvoltage conditions
  • 3-button control station included
  • Motor: Powerful 1/2 HP, 115V single phase motor with instant reverse and internal automatic reset thermal overload. Removable without affecting limit switch settings.
  • Operator/Motor Control: Solid-state Medium-Duty circuit board.
  • Control Circuit: 24V NEC Class 2.
  • Floor Level Disconnect: Floor level disconnect provides emergency manual operation.
  • Brake: Heavy-duty solenoid actuated brake standard.
  • Wiring Type: All operators are factory preset to C2 wiring providing momentary contact to open and stop with constant contact to close. Momentary contact to close (B2 wiring) can be easily set, but requires the presence of either CPS-U, CPS-UN4, or CPS-EI safety devices. The operator is pre-wired to accept a sensing device, photoelectric control, radio controls and most types of access control equipment.
  • Drive Reduction: First stage heavy-duty 4L V-belt; second stage and third stages #48 chain.
  • Push Button Station: 3-button station for OPEN/CLOSE/STOP functions is standard for all operators. Controls with 1, 2 and 3 buttons are available.
  • Construction: NEMA 1 Type electrical box, heavy-duty 11-gauge steel frame with durable baked-on powder coat finish, all reduction sprockets drilled and pinned to shafts.
  • Friction Clutch: Adjustable friction clutch helps protect against major damage to door and operator should the door meet an obstruction.
  • Radio Receiver: 315MHz radio receiver is integral to the Medium-Duty logic board. Accepts up to 20 Security+® remote controls and unlimited DIP switch remote controls.
  • Warranty: 2-year warranty.
  • Primary Monitored Entrapment Protection: The presence of primary entrapment protection is required for all modes and features beyond basic constant-pressure-to-close performance. Primary entrapment protection devices are monitored continuously to insure safe operation of the door and limit door operator functionality should an obstruction be detected or in the event of device failure. LiftMaster Monitored Entrapment Protection devices, CPS-U, CPS-UN4 and CPS-EI, are designed to work in conjunction with LiftMaster commercial door operators to provide enhanced door safety and a broad range of modes and features to end users. Either monitored photo-sensor or monitored 4-wire sensing edge (in conjunction with the CPS-EI Edge Interface) protection may be selected, but one must be detected by the LiftMaster Logic 4.0 or Medium-Duty Logic circuit board in order to unlock full functionality.
  • Ancillary Entrapment Protection: (optional) LiftMaster Retro-Reflective Commercial Protector System® photo sensors, 2-wire non-monitored sensing edges and pneumatic sensing edges are considered secondary entrapment protection and may be used to supplement primary entrapment protection or basic constant-pressure-to-close.
  • Radio Control: Universal transmitters and receivers are available to signal the operator to open and/or close.
  • Rolling Door Interlock Switch: Interlock switch disables the operator control circuit when a manual door lock is engaged preventing damage to the door and operator.
  • Emergency Egress Device: Attractive face plate mounts flush on wall and contains handle to disconnect operator from a grille, thereby allowing the grille to be opened manually or by spring tension.

 

The post LiftMaster Opener MJ appeared first on All Star Garage Door 901-240-7215 Garage Door & Spring Repair.

]]> LiftMaster Opener MHS https://garage-door-repair-memphis.com/shop/commercial/operators-commercial/opener-lmmhs/ Wed, 20 Sep 2017 20:06:13 +0000 http://garage-door-repair-memphis.com/?post_type=product&p=16393 Hoist Operator

Medium-Duty, for Rolling Sheet Doors

The post LiftMaster Opener MHS appeared first on All Star Garage Door 901-240-7215 Garage Door & Spring Repair.

]]> Slow-Speed Hoist Operator for Rolling Sheet Doors

Model MHS is an Medium-Duty Logic slow-speed hoist operator for rolling sheet doors.

It features a high-starting torque motor with overload protection, adjustable friction clutch, a compact design, and an emergency chain hoist with an electric interlock.

  • UL325-2010 compliant Medium-Duty Logic programmable integrated circuit board
  • Built-in 3-channel, 315MHz radio receiver accepts up to 20 Chamberlain® Security+® or unlimited DIP switch remotes.
  • 3-button remotes can be programmed for OPEN/CLOSE/STOP operation
  • Programmable C2 or B2 wiring options (B2 requires CPS-U, CPS-UN4, or CPS-EI)
  • Integrated Timer-to-Close (TTC) allows programming from 5 to 60 seconds in 5-second increments. Allows for timed automatic door closure after the door reaches the full open position (Requires monitored safety devices, with CPS-U, CPS-UN4, or CPS-EI)
  • Integrated 90-second maximum run timer
  • UL325-2010 Monitored Entrapment Capability
  • Monitored protection against transient overvoltage conditions
  • 3-button control station included
  • Motor: Powerful 1/2 HP, 115V single-phase motor with instant reverse, capacitor start and overload protection. Removable without affecting limit switch settings.
  • Drive Reduction: First-stage heavy-duty 4L V-belt; second and third stages #48 chain.
  • Emergency Manual Operation: Easy emergency manual operation using a floor level disconnect or an electrically interlocked chain hoist mechanism.
  • Operator/Motor Control: Solid-state Medium-Duty Logic circuit board.
  • Control Circuit: 24V NEC Class 2.
  • Wiring Type: All operators are factory preset to C2 wiring providing momentary contact to open and stop with constant contact to close. Momentary contact to close (B2 wiring) can be easily set, but requires the presence of either CPS-U, CPS-UN4, or CPS-EI safety devices. The operator is pre-wired to accept a sensing device, photoelectric control, radio controls and most types of access control equipment.
  • Radio Receiver: 315 MHz radio receiver is integral to the Medium-Duty Logic board. Accepts up to 20 Security+® remote controls and unlimited DIP switch remote controls.
  • Bushings: Heavy-duty oil-filled bushings.
  • Friction Clutch: Adjustable, helps protect against major damage to door and operator should the door meet an obstruction.
  • Construction: NEMA 1 type electrical box, heavy-duty 11-gauge steel frame with durable powdercoat finish, all reduction sprockets drilled and pinned to shafts.
  • Push Button Station: 3-button station for OPEN/CLOSE functions is standard for all operators. Controls with 1, 2 and 3 buttons are available.
  • Warranty: 2-year warranty.
  • Primary Monitored Entrapment Protection: The presence of primary entrapment protection is required for all modes and features beyond basic constant-pressure-to-close performance. Primary entrapment protection devices are monitored continuously to insure safe operation of the door and limit door operator functionality should an obstruction be detected or in the event of device failure. LiftMaster Monitored Entrapment Protection devices, CPS-U, CPS-UN4 and CPS-EI, are designed to work in conjunction with LiftMaster commercial door operators to provide enhanced door safety and a broad range of modes and features to end users. Either monitored photo-sensor or monitored 4-wire sensing edge (in conjunction with the CPS-EI Edge Interface) protection may be selected, but one must be detected by the LiftMaster Logic 4.0 or Medium-Duty Logic circuit board in order to unlock full functionality.
  • Ancillary Entrapment Protection: (optional) LiftMaster Retro-Reflective Commercial Protector System® photo sensors, 2-wire non-monitored sensing edges and pneumatic sensing edges are considered secondary entrapment protection and may be used to supplement primary entrapment protection or basic constant-pressure-to-close.
  • Radio Control: Universal transmitters and receivers are available to signal the operator to open and/or close.
  • Rolling Door Interlock Switch: Interlock switch disables the operator control circuit when a manual door lock is engaged preventing damage to the door and operator.
  • Wireless Access Control Devices: Weather-proof single- or 3-button wireless control stations are available and compatible with the Medium-Duty Logic on-board receiver. In addition, a choice of either a 5- or 250-code wireless keypad is available. Wireless controls should be used to supplement hard-wired controls and should not be used in place of such controls unless a sensing device, such as photo-eyes or a sensing edge, is present.

 

The post LiftMaster Opener MHS appeared first on All Star Garage Door 901-240-7215 Garage Door & Spring Repair.

]]> LiftMaster Opener MH https://garage-door-repair-memphis.com/shop/commercial/operators-commercial/opener-lmmh/ Wed, 20 Sep 2017 20:00:24 +0000 http://garage-door-repair-memphis.com/?post_type=product&p=16392 Hoist Operator

Medium-Duty, for Small Rolling Doors, Grilles and Sectional Doors w/vertical or high lift.

The post LiftMaster Opener MH appeared first on All Star Garage Door 901-240-7215 Garage Door & Spring Repair.

]]> Medium-Duty Hoist Operator

Model MH is a Medium-Duty Logic hoist operator.

It features an adjustable friction clutch, a standard solenoid brake, a high-starting torque motor, a compact design and an emergency chain hoist with an electric interlock.

  • UL325-2010 compliant Medium-Duty Logic programmable integrated circuit board
  • Built-in 3-channel, 315MHz radio receiver accepts up to 20 Chamberlain® Security+® or unlimited DIP switch remotes.
  • 3-button remotes can be programmed for OPEN/CLOSE/STOP operation
  • Programmable C2 or B2 wiring options (B2 requires CPS-U, CPS-UN4, or CPS-EI)
  • Integrated Timer-to-Close (TTC) allows programming from 5 to 60 seconds in 5-second increments. Allows for timed automatic door closure after the door reaches the full open position (Requires monitored safety devices, with CPS-U, CPS-UN4, or CPS-EI)
  • Integrated 90-second maximum run timer
  • UL325-2010 Monitored Entrapment Capability
  • Monitored protection against transient overvoltage conditions
  • 3-button control station included
  • Motor: Powerful 1/2 HP, 115V single phase motor with instant reverse and internal automatic reset thermal overload. Removable without affecting limit switch settings.
  • Operator/Motor Control: Solid-state Medium-Duty circuit board.
  • Control Circuit: 24V NEC Class 2.
  • Emergency Manual Operation: Model MH provides easy emergency manual operation using a floor level disconnect and an electrically interlocked chain hoist mechanism.
  • Brake: Heavy-duty solenoid actuated brake standard.
  • Wiring Type: All operators are factory preset to C2 wiring providing momentary contact to open and stop with constant contact to close. Momentary contact to close (B2 wiring) can be easily set, but requires the presence of either CPS-U, CPS-UN4, or CPS-EI safety devices. The operator is pre-wired to accept a sensing device, photoelectric control, radio controls and most types of access control equipment.
  • Drive Reduction: First stage heavy-duty 4L V-belt; second and third stages #48 chain.
  • Bearings: Heavy-duty oil-filled bearings.
  • Push Button Station: 3-button station for OPEN/CLOSE/STOP functions is standard for all operators. Controls with 1, 2 and 3 buttons are available.
  • Construction: NEMA 1 type electrical box, heavy-duty 11-gauge steel frame with baked-on powder coat finish, all reduction sprockets drilled and pinned to shafts.
  • Radio Receiver: 315MHz radio receiver is integral to the Medium-Duty logic board. Accepts up to 20 Security+® remote controls and unlimited DIP switch remote controls.
  • Friction Clutch: Adjustable friction clutch helps protect against damage to the door and operator should the door meet an obstruction.
  • Warranty: 2-year warranty.
  • Primary Monitored Entrapment Protection: The presence of primary entrapment protection is required for all modes and features beyond basic constant-pressure-to-close performance. Primary entrapment protection devices are monitored continuously to insure safe operation of the door and limit door operator functionality should an obstruction be detected or in the event of device failure. LiftMaster Monitored Entrapment Protection devices, CPS-U, CPS-UN4 and CPS-EI, are designed to work in conjunction with LiftMaster commercial door operators to provide enhanced door safety and a broad range of modes and features to end users. Either monitored photo-sensor or monitored 4-wire sensing edge (in conjunction with the CPS-EI Edge Interface) protection may be selected, but one must be detected by the LiftMaster Logic 4.0 or Medium-Duty Logic circuit board in order to unlock full functionality.
  • Ancillary Entrapment Protection: (optional) LiftMaster Retro-Reflective Commercial Protector System® photo sensors, 2-wire non-monitored sensing edges and pneumatic sensing edges are considered secondary entrapment protection and may be used to supplement primary entrapment protection or basic constant-pressure-to-close.
  • Radio Control: Universal transmitters and receivers are available to signal the operator to open and/or close.
  • Rolling Door Interlock Switch: Interlock switch disables the operator control circuit when a manual door lock is engaged preventing damage to the door and operator.
  • Weather-tight Control Devices: A variety of weather-tight control devices are available including 3-button control stations, key control stations and digital keypads.

 

The post LiftMaster Opener MH appeared first on All Star Garage Door 901-240-7215 Garage Door & Spring Repair.

]]> LiftMaster Opener MGJ https://garage-door-repair-memphis.com/shop/commercial/operators-commercial/opener-lmmgj/ Wed, 20 Sep 2017 19:54:40 +0000 http://garage-door-repair-memphis.com/?post_type=product&p=16390 Jackshaft Operator

Medium-Duty, for Rolling Grilles and Shutters

 

The post LiftMaster Opener MGJ appeared first on All Star Garage Door 901-240-7215 Garage Door & Spring Repair.

]]> Medium-Duty Gear-Reduced Jackshaft Operator for Rolling Grilles and Shutters

Model MGJ is a Medium-Duty Logic gear-reduced jackshaft operator for rolling grilles and shutters.

It features a compact design, a floor level disconnect, a high-starting torque motor and a heavy-duty wormgear reducer.

  • UL325-2010 compliant Medium-Duty Logic programmable integrated circuit board
  • Built-in 3-channel, 315MHz radio receiver accepts up to 20 Chamberlain® Security+® or unlimited DIP switch remotes.
  • 3-button remotes can be programmed for OPEN/CLOSE/STOP operation
  • Programmable C2 or B2 wiring options (B2 requires CPS-U, CPS-UN4, or CPS-EI)
  • Integrated Timer-to-Close (TTC) allows programming from 5 to 60 seconds in 5-second increments. Allows for timed automatic door closure after the door reaches the full open position (Requires monitored safety devices, with CPS-U, CPS-UN4, or CPS-EI)
  • Integrated 90-second maximum run timer
  • UL325-2010 Monitored Entrapment Capability
  • Monitored protection against transient overvoltage conditions
  • 3-button control station included
  • Motor: Powerful 1/2 HP, single phase motor with instant reverse and internal automatic reset thermal overload. Removable without affecting limit switch settings.
  • Wiring Type: All operators are factory preset to C2 wiring providing momentary contact to open and stop with constant contact to close. Momentary contact to close (B2 wiring) can be easily set, but requires the presence of either CPS-U, CPS-UN4, or CPS-EI safety devices. The operator is pre-wired to accept a sensing device, photoelectric control, radio controls and most types of access control equipment.
  • Operator/Motor Control: Solid-state Medium-Duty circuit board.
  • Control Circuit: 24V NEC Class 2.
  • Floor Level Disconnect: Floor level disconnect provides emergency manual operation.
  • Drive Reduction: Heavy-duty wormgear-in-oil-bath speed reducer.
  • Push Button Station: 3-button station for OPEN/CLOSE/STOP functions is standard for all operators. Controls with 1, 2 and 3 buttons are available.
  • Construction: NEMA 1 type electrical box with baked-on powder coat finish. Easily field converted for right or left mounting.
  • Radio Receiver: 315MHz radio receiver is integral to the Medium-Duty logic board. Accepts up to 20 Security+® remote controls and unlimited DIP switch remote controls.
  • Warranty: 2-year warranty.
  • Primary Monitored Entrapment Protection: The presence of primary entrapment protection is required for all modes and features beyond basic constant-pressure-to-close performance. Primary entrapment protection devices are monitored continuously to insure safe operation of the door and limit door operator functionality should an obstruction be detected or in the event of device failure. LiftMaster Monitored Entrapment Protection devices, CPS-U, CPS-UN4 and CPS-EI, are designed to work in conjunction with LiftMaster commercial door operators to provide enhanced door safety and a broad range of modes and features to end users. Either monitored photo-sensor or monitored 4-wire sensing edge (in conjunction with the CPS-EI Edge Interface) protection may be selected, but one must be detected by the LiftMaster Logic 4.0 or Medium-Duty Logic circuit board in order to unlock full functionality.
  • Ancillary Entrapment Protection: (optional) LiftMaster Retro-Reflective Commercial Protector System® photo sensors, 2-wire non-monitored sensing edges and pneumatic sensing edges are considered secondary entrapment protection and may be used to supplement primary entrapment protection or basic constant-pressure-to-close.
  • Radio Control: Universal transmitters and receivers are available to signal the operator to open and/or close.
  • Emergency Egress Device: Attractive face plate mounts flush to the wall and contains handle to disconnect operator from a grille, thereby allowing the grille to be opened manually or by spring tension.
  • Rolling Door Interlock Switch: Interlock switch disables the operator control circuit when a manual door lock is engaged preventing damage to the door and operator.

 

The post LiftMaster Opener MGJ appeared first on All Star Garage Door 901-240-7215 Garage Door & Spring Repair.

]]>