Grille Archives • All Star Garage Door 901-240-7215 Garage Door & Spring Repair

LiftMaster Opener H

All Star Garage Door — Wed, 20 Sep 2017 20:18:35 +0000

Industrial-Duty Hoist Operator

Hoist (H) style commercial door operators are optimal for industrial applications.

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.

The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.

H operators are attached to the door jackshaft to indirectly drive the door.

Connectivity

MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone, tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device, ensuring the status of your commercial door.
MyQ Mobile App is a free download with no annual activation fee

Safety & Security

Security+ 2.0™ safeguards your facility – with every click, a new code is sent to the commercial door operator so the door opens only for you.
UL 325 requires all commercial door operators to be either constant pressure to close or be equipped with a primary external monitored entrapment protection device

Standard Features

DUAL VOLTAGE CONNECTIONS
Increase flexibility by enabling the installer to select the required voltage, within phase, to meet job-site requirements.
Within phases, voltage is selectable at the time of installation with the placement of a connector.
• Single-Phase: 115V and 230V
• 3-Phase: 208V, 230V and 460V
• 575V is a discrete model without field-selectable voltage
FLOOR LEVEL CHAIN HOIST WITH ELECTRICAL INTERLOCK
Provides easy disconnect and manual operation in an emergency.
CONTROL FUNCTION SELECTOR DIAL
Enables easy selection and programming of (7) wiring types, from constant pressure to close, to specialized Timer-to-Close functionality to meet end-user needs.
TIMER-TO-CLOSE
Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace
of mind.
CONTINUOUS-DUTY HIGH-STARTING TORQUE MOTOR
Performs in demanding industrial overhead and rolling door applications.
MOTOR REMOVABLE WITHOUT AFFECTING LIMIT SWITCH SETTINGS
Saves time and money for maintenance.
ADJUSTABLE FRICTION CLUTCH
Helps to protect door and operator from damage should the door meet an obstruction.
MID-STOP
Enables partial opening of door to a pre-programmed position for energy savings, time savings, and convenience.
MAXIMUM RUN TIMER
Reverses or stops door if closing time exceeds expected time-frame to limit damage to door and operator.
DELAY-ON-REVERSE CIRCUIT
Prevents abrupt reversal of door, reducing wear on the door and operator system.
3-BUTTON CONTROL STATION WITH MAINTENANCE ALERT SYSTEM (MAS)
Provides open/close/stop functions and notification when routine maintenance is required.

Specifications

SECURITY+ 2.0™ RADIO RECEIVER
Standard on-board with Logic 5.0 operators. Accepts up to (90) single-button or (30) 3-Button remote controls plus up to (30) wireless keypads or an unlimited number of DIP switch remotes.
MOTOR
Continuous-duty high-starting torque motor with instant reverse and overload protection. Available in 1/3, 1/2, 3/4 and 1 HP; single- or three-phase. Capacitor start on single-phase. Removable without affecting limit switch settings.
WIRING TYPE
Operators are factory preset to C2 wiring, providing momentary contact to open and stop, with constant contact to close. Monitored entrapment protection, using approved photo sensors or sensing edges is optional, although recommended, when using C2, D1 or E2. All other wiring types, B2, T, TS and FSTS can be selected with the addition of an appropriately monitored entrapment protection device (LiftMaster® CPS-U photo eyes, LiftMaster OES monitored sensing edge, or a monitored sensing edge supported by the CPS-EI, as examples). Logic 5.0 operators can only accept UL-Approved LiftMaster monitored entrapment protection devices.
CONTROL CIRCUIT
5V DC NEC Class 2.
DRIVE REDUCTION
First-stage heavy-duty 5L V-belt; second-third-fourth stages #48 chain; #50 output sprocket chain.
BEARINGS/BUSHINGS
Industrial ball bearings on 1″ output shaft, heavy-duty oil-filled bushings on reduction shafts.
BRAKE
Standard on 3/4 and 1 HP operators.
(optional on 1/2 HP; not available on 1/3 HP).
CONSTRUCTION
NEMA 1 type electrical box, heavy-duty 11-gauge steel frame with durable powder coat finish, all reduction sprockets drilled and pinned to shafts.
WARRANTY
Two Years

The post LiftMaster Opener H appeared first on All Star Garage Door 901-240-7215 Garage Door & Spring Repair.

LiftMaster Opener J

All Star Garage Door — Wed, 20 Sep 2017 19:41:41 +0000

Industrial Duty Jackshaft Operator

Jackshaft (J) style commercial door operators are optimal for industrial applications.

Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.

The operators are typically mounted to the wall when used with smaller sectional overhead doors with a vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.

J operators are attached to the door jackshaft to indirectly drive the door.

Connectivity

MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone, tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device, ensuring the status of your commercial door.
MyQ Mobile App is a free download with no annual activation fee.

Safety & Security

Security+ 2.0™ safeguards your facility – with every click, a new codeis sent to the commercial door operator so the door opens only for you.
UL 325 requires all commercial door operators to be either constant pressure to close or be equipped with a primary external monitored entrapment protection device.

Standard Features

DUAL VOLTAGE CONNECTIONS
Increase flexibility by enabling the installer to select the required voltage, within phase, to meet job-site requirements.
Within phases, voltage is selectable at the time of installation with the placement of a connector.
• Single-Phase: 115V and 230V
• 3-Phase: 208V, 230V and 460V
• 575V is a discrete model without field-selectable voltage
FLOOR LEVEL DISCONNECT
Enables manual lifting in an emergency.
CONTROL FUNCTION SELECTOR DIAL
Enables easy selection and programming of (7) wiring types, from constant pressure to close, to specialized Timer-to-Close functionality to meet end-user needs.
TIMER-TO-CLOSE
Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
CONTINUOUS-DUTY HIGH-STARTING TORQUE MOTOR
Performs in demanding industrial overhead door applications.
MOTOR REMOVABLE WITHOUT AFFECTING LIMIT SWITCH SETTINGS
Saves time and money for maintenance.
ADJUSTABLE FRICTION CLUTCH
Helps to protect door and operator from damage should the door meet an obstruction.
MID-STOP
Enables partial opening of door to a pre-programmed position for energy savings, time savings and convenience.
MAXIMUM RUN TIMER
Reverses or stops door if closing time exceeds expected time-frame to limit damage to door and operator.
DELAY-ON-REVERSE CIRCUIT
Prevents abrupt reversal of door, reducing wear on the door and operator system.
3-BUTTON CONTROL STATION WITH MAINTENANCE ALERT SYSTEM (MAS)
Provides open/close/stop functions and notification when routine maintenance is required.

Specifications

SECURITY+ 2.0™ RADIO RECEIVER
Standard on-board with Logic 5.0 operators. Accepts up to (90) single-button or (30) 3-Button remote controls plus up to (30) wireless keypads or an unlimited number of DIP switch remotes.
MOTOR
Continuous-duty high-starting torque motor with instant reverse and overload protection. Available in 1/3, 1/2, 3/4 and 1 HP; single- or three-phase. Capacitor start on single-phase. Removable without affecting limit switch settings.
WIRING TYPE
Operators are factory preset to C2 wiring, providing momentary contact to open and stop, with constant contact to close. Monitored entrapment protection, using approved photo sensors or sensing edges is optional, although recommended, when using C2, D1 or E2. All other wiring types, B2, T, TS and FSTS can be selected with the addition of an appropriately monitored entrapment protection device (LiftMaster® CPS-U photo eyes, LiftMaster OES monitored sensing edge, or a monitored sensing edge supported by the CPS-EI, as examples). Logic 5.0 operators can only accept UL-Approved LiftMaster monitored entrapment protection devices..
CONTROL CIRCUIT
5V DC NEC Class 2.
DRIVE REDUCTION
First-stage heavy-duty 5L V-belt; second-third-fourth stages #48 chain; #50 output sprocket chain.
BEARINGS
Industrial ball bearings on 1″ output shaft, heavy-duty oil-filled bushings on reduction shafts.
BRAKE
Standard on 3/4 and 1 HP operators.
(optional on 1/2 HP; not available on 1/3 HP).
CONSTRUCTION
NEMA 1 type electrical box, heavy-duty 11-gauge steel frame with durable powder coat finish, all reduction sprockets drilled and pinned to shafts.
WARRANTY
Two Years.

The post LiftMaster Opener J appeared first on All Star Garage Door 901-240-7215 Garage Door & Spring Repair.

LiftMaster Opener GH

All Star Garage Door — Wed, 20 Sep 2017 19:24:26 +0000

Heavy Industrial-Duty Gear-Reduced Hoist Operator

Gearhead (GH) style commercial door operators employ lubricated gears for heavy industrial, high cycle applications.

GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.

The operators are typically mounted to the wall when used with sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.

GH operators are attached to the door jackshaft to indirectly drive the door.

Connectivity

MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone, tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device, ensuring the status of your commercial door.
MyQ Mobile App is a free download with no annual activation fee.

Safety & Security

Security+ 2.0™ safeguards your facility – with every click, a new codeis sent to the commercial door operator so the door opens only for you.
UL 325 requires all commercial door operators to be either constant pressure to close or be equipped with a primary external monitored entrapment protection device.

Standard Features

DUAL VOLTAGE CONNECTIONS
Increase flexibility by enabling the installer to select the required voltage, within phase, to meet job-site requirements.
Within phases, voltage is selectable at the time of installation with the placement of a connector.
• Single-Phase: 115V and 230V
• 3-Phase: 208V, 230V and 460V
• 575V is a discrete model without field-selectable voltage
FLOOR LEVEL CHAIN HOIST WITH ELECTRICAL INTERLOCK
Provides easy disconnect and manual operation in an emergency.
HEAVY-DUTY WORM GEAR-IN-OIL GEAR REDUCER
Delivers performance for heavy industrial, high cycle applications.
CONTROL FUNCTION SELECTOR DIAL
Enables easy selection and programming of (7) wiring types, from constant pressure to close, to specialized Timer-to-Close functionality to meet
end-user needs.
TIMER-TO-CLOSE
Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace
of mind.
CONTINUOUS-DUTY HIGH-STARTING TORQUE MOTOR
Performs in demanding industrial overhead and rolling door applications.
MOTOR REMOVABLE WITHOUT AFFECTING LIMIT SWITCH SETTINGS
Saves time and money for maintenance.
MID-STOP
Enables partial opening of door to a pre-programmed position for energy savings, time savings, and convenience.
MAXIMUM RUN TIMER
Reverses or stops door if closing time exceeds expected time-frame to limit damage to door and operator.
DELAY-ON-REVERSE CIRCUIT
Prevents abrupt reversal of door, reducing wear on the door and operator system.
3-BUTTON CONTROL STATION WITH MAINTENANCE ALERT SYSTEM (MAS)
Provides open/close/stop functions and notification when routine maintenance is required.

Specifications

SECURITY+ 2.0™ RADIO RECEIVER
Standard on-board with Logic 5.0 operators. Accepts up to (90) single-button or (30) 3-Button remote controls plus up to (30) wireless keypads or an unlimited number of DIP switch remotes.
MOTOR
Continuous-duty high-starting torque motor with instant reverse and overload protection. Available in 1/2, 3/4, 1, 1-1/2, 2 and 3 HP; single- or three-phase. Capacitor start on single-phase. Removable without affecting limit switch settings
WIRING TYPE
Operators are factory preset to C2 wiring, providing momentary contact to open and stop, with constant contact to close. Monitored entrapment protection, using approved photo sensors or sensing edges is optional, although recommended, when using C2, D1 or E2. All other wiring types, B2, T, TS and FSTS can be selected with the addition of an appropriately monitored entrapment protection device (LiftMaster® CPS-U photo eyes, LiftMaster OES monitored sensing edge, or a monitored sensing edge supported by the CPS-EI, as examples). Logic 5.0 operators can only accept UL-Approved LiftMaster monitored entrapment protection devices.
CONTROL CIRCUIT
5V DC NEC Class 2.
DRIVE REDUCTION
45:1 first-stage using heavy-duty gears running in oil bath; cast iron housing. Special “all-climate” synthetic gear oil for greater low-temperature performance; #50 output sprocket chain.
BEARINGS
Sealed roller bearings in gear reducer.
BRAKE
Standard on all GH operators.
CONSTRUCTION
NEMA 1 type electrical box, heavy-duty 11-gauge steel frame with durable powder coat finish, all reduction sprockets drilled and pinned to shafts.
WARRANTY
Two Years.

The post LiftMaster Opener GH appeared first on All Star Garage Door 901-240-7215 Garage Door & Spring Repair.

LiftMaster Opener DJ

All Star Garage Door — Wed, 20 Sep 2017 19:19:15 +0000

Industrial-Duty Jackshaft Operator with Internal Door Lock Sensor

Door Lock Jackshaft (DJ) style commercial door operators are ideal for shopping mall applications with lighter rolling doors and grilles.

Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.

These operators include a door lock sensor to prevent damage to the door and operator caused by attempts to automatically open a locked door.

The operators are typically mounted to the wall when used with smaller sectional overhead doors with vertical or high lift and mounted to the side, or the front of the hood, when used with rolling doors and grilles.

DJ operators are attached to the door jackshaft to indirectly drive the door.

Connectivity

MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone, tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device, ensuring the status of your commercial door.
MyQ Mobile App is a free download with no annual activation fee.

Safety & Security

Security+ 2.0™ safeguards your facility – with every click, a new code is sent to the commercial door operator so the door opens only for you.
UL 325 requires all commercial door operators to be either constant pressure to close or be equipped with a primary external monitored entrapment protection device.

Standard Features

DUAL VOLTAGE CONNECTIONS
Increase flexibility by enabling the installer to select the required voltage, within phase, to meet job-site requirements.
Within phases, voltage is selectable at the time of installation with the placement of a connector.
• Single-Phase: 115V and 230V
• 3-Phase: 208V, 230V and 460V
• 575V is a discrete model without field-selectable voltage
INTERNAL DOOR LOCK SENSOR
Eliminates jamming and damage to door and operator if door is opened when locked.
FLOOR LEVEL DISCONNECT
Enables manual lifting in an emergency.
CONTROL FUNCTION SELECTOR DIAL
Enables easy selection and programming of (7) wiring types, from constant pressure to close, to specialized Timer-to-Close functionality to meet end-user needs.
TIMER-TO-CLOSE
Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace
of mind.
CONTINUOUS-DUTY HIGH-STARTING TORQUE MOTOR
Performs in demanding industrial overhead and rolling door applications.
MOTOR REMOVABLE WITHOUT AFFECTING LIMIT SWITCH SETTINGS
Saves time and money for maintenance.
ADJUSTABLE FRICTION CLUTCH
Helps to protect door and operator from damage should the door meet an obstruction.
MID-STOP
Enables partial opening of door to a pre-programmed position for energy savings, time savings and convenience.
MAXIMUM RUN TIMER
Reverses or stops door if closing time exceeds expected time-frame to limit damage to door and operator.
DELAY-ON-REVERSE CIRCUIT
Prevents abrupt reversal of door, reducing wear on the door and operator system.

Specifications

SECURITY+ 2.0™ RADIO RECEIVER
Standard on-board with Logic 5.0 operators. Accepts up to (90) single-button or (30) 3-Button remote controls plus up to (30) wireless keypads or an unlimited number of DIP switch remotes.
MOTOR
Continuous-duty high-starting torque motor with instant reverse and overload protection. Available in 1/2 and 3/4 HP; single- or three-phase. Capacitor start on single-phase. Removable without affecting limit switch settings.
WIRING TYPE
Operators are factory preset to C2 wiring, providing momentary contact to open and stop, with constant contact to close. Monitored entrapment protection, using approved photo sensors or sensing edges is optional, although recommended, when using C2, D1 or E2. All other wiring types, B2, T, TS and FSTS can be selected with the addition of an appropriately monitored entrapment protection device (LiftMaster® CPS-U photo eyes, LiftMaster OES monitored sensing edge, or a monitored sensing edge supported by the CPS-EI, as examples). Logic 5.0 operators can only accept UL-Approved LiftMaster monitored entrapment protection devices.
CONTROL CIRCUIT
5V DC NEC Class 2.
DRIVE REDUCTION
First-stage heavy-duty 5L V-belt; second-third-fourth stages #48 chain; #50 output sprocket chain.
BEARINGS/BUSHINGS
Industrial ball bearings on a 1″ output shaft; heavy-duty oil-filled bushings on reduction shafts.
BRAKE
Standard on 3/4 HP operators (optional on 1/2 HP).
CONSTRUCTION
NEMA 1 type electrical box, heavy-duty 11-gauge steel frame with durable powder coat finish, all reduction sprockets drilled and pinned to shafts.
WARRANTY
Two Years.

The post LiftMaster Opener DJ appeared first on All Star Garage Door 901-240-7215 Garage Door & Spring Repair.

LiftMaster Opener DHJ

All Star Garage Door — Wed, 20 Sep 2017 19:13:01 +0000

Industrial-Duty Hoist Operator with Internal Door Lock Sensor

Door Lock Hoist/Jackshaft (DHJ) style commercial door operators are ideal for shopping mall applications with heavier rolling doors and grilles.

The operators provide a floor level chain hoist to ease manual operation in an emergency or power outage.

The operators include a door lock sensor to prevent damage to the door and operator caused by attempts to automatically open a locked door.

The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall, or the front of the hood, when used with rolling doors and grilles.

DHJ operators are attached to the door jackshaft to indirectly drive the door.

Connectivity

MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone, tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device, ensuring the status of your commercial door.

Safety & Security

Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
UL 325 requires all commercial door operators to be either constant pressure to close or be equipped with a primary external monitored entrapment protection device.

Standard Features

DUAL VOLTAGE CONNECTIONS
Increase flexibility by enabling the installer to select the required voltage, within phase, to meet job-site requirements.
Within phases, voltage is selectable at the time of installation with the placement of a connector.
• Single-Phase: 115V and 230V
• 3-Phase: 208V, 230V and 460V
• 575V is a discrete model without field-selectable voltage
INTERNAL DOOR LOCK SENSOR
Eliminates jamming and damage to door and operator if door is opened when locked.
FLOOR LEVEL CHAIN HOIST WITH ELECTRICAL INTERLOCK
Provides easy disconnect and manual operation in an emergency.
FLOOR LEVEL DISCONNECT
Enables manual lifting in an emergency.
CONTROL FUNCTION SELECTOR DIAL
Enables easy selection and programming of (7) wiring types, from constant pressure to close, to specialized Timer-to-Close functionality to meet
end-user needs.
TIMER-TO-CLOSE
Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace
of mind.
CONTINUOUS-DUTY HIGH-STARTING TORQUE MOTOR
Performs in demanding industrial overhead and rolling door applications.
MOTOR REMOVABLE WITHOUT AFFECTING LIMIT SWITCH SETTINGS
Saves time and money for maintenance.
ADJUSTABLE FRICTION CLUTCH
Helps to protect door and operator from damage should the door meet an obstruction.
MID-STOP
Enables partial opening of door to a pre-programmed position for energy savings, time savings and convenience.
MAXIMUM RUN TIMER
Reverses or stops door if closing time exceeds expected time-frame to limit damage to door and operator.
DELAY-ON-REVERSE CIRCUIT
Prevents abrupt reversal of door, reducing wear on the door and operator system.

Specifications

SECURITY+ 2.0™ RADIO RECEIVER
Standard on-board with Logic 5.0 operators. Accepts up to (90) single-button or (30) 3-Button remote controls plus up to (30) wireless keypads or an unlimited number of DIP switch remotes.
MOTOR
Continuous-duty high-starting torque motor with instant reverse and overload protection. Available in 1/2 and 3/4 HP; single- or three-phase. Capacitor start on single-phase. Removable without affecting limit switch settings.
WIRING TYPE
Operators are factory preset to C2 wiring, providing momentary contact to open and stop, with constant contact to close. Monitored entrapment protection, using approved photo sensors or sensing edges is optional, although recommended, when using C2, D1 or E2. All other wiring types, B2, T, TS and FSTS can be selected with the addition of an appropriately monitored entrapment protection device (LiftMaster® CPS-U photo eyes, LiftMaster OES monitored sensing edge, or a monitored sensing edge supported by the CPS-EI, as examples). Logic 5.0 operators can only accept UL-Approved LiftMaster monitored entrapment protection devices.
CONTROL CIRCUIT
5V DC NEC Class 2.
DRIVE REDUCTION
First-stage heavy-duty 5L V-belt; second-third-fourth stages #48 chain; #50 output sprocket chain.
BEARINGS/BUSHINGS
Industrial ball bearings on a 1″ output shaft, heavy-duty oil-filled bushings on reduction shafts.
BRAKE
Standard on 3/4 operators (optional on 1/2 HP).
CONSTRUCTION
NEMA 1 type electrical box, heavy-duty 11-gauge steel frame with durable powder coat finish, all reduction sprockets drilled and pinned to shafts.
WARRANTY
Two Years.

The post LiftMaster Opener DHJ appeared first on All Star Garage Door 901-240-7215 Garage Door & Spring Repair.