Jackshaft Archives • All Star Garage Door 901-240-7215 Garage Door & Spring Repair https://garage-door-repair-memphis.com/product-tag/jackshaft/ Garage Doors for your Home or Business Tue, 02 Jun 2020 14:31:11 +0000 en-US hourly 1 LiftMaster Opener MGJ https://garage-door-repair-memphis.com/shop/commercial/operators-commercial/opener-lmmgj/ Wed, 20 Sep 2017 19:54:40 +0000 http://garage-door-repair-memphis.com/?post_type=product&p=16390 Jackshaft Operator

Medium-Duty, for Rolling Grilles and Shutters

 

The post LiftMaster Opener MGJ appeared first on All Star Garage Door 901-240-7215 Garage Door & Spring Repair.

]]> Medium-Duty Gear-Reduced Jackshaft Operator for Rolling Grilles and Shutters

Model MGJ is a Medium-Duty Logic gear-reduced jackshaft operator for rolling grilles and shutters.

It features a compact design, a floor level disconnect, a high-starting torque motor and a heavy-duty wormgear reducer.

  • UL325-2010 compliant Medium-Duty Logic programmable integrated circuit board
  • Built-in 3-channel, 315MHz radio receiver accepts up to 20 Chamberlain® Security+® or unlimited DIP switch remotes.
  • 3-button remotes can be programmed for OPEN/CLOSE/STOP operation
  • Programmable C2 or B2 wiring options (B2 requires CPS-U, CPS-UN4, or CPS-EI)
  • Integrated Timer-to-Close (TTC) allows programming from 5 to 60 seconds in 5-second increments. Allows for timed automatic door closure after the door reaches the full open position (Requires monitored safety devices, with CPS-U, CPS-UN4, or CPS-EI)
  • Integrated 90-second maximum run timer
  • UL325-2010 Monitored Entrapment Capability
  • Monitored protection against transient overvoltage conditions
  • 3-button control station included
  • Motor: Powerful 1/2 HP, single phase motor with instant reverse and internal automatic reset thermal overload. Removable without affecting limit switch settings.
  • Wiring Type: All operators are factory preset to C2 wiring providing momentary contact to open and stop with constant contact to close. Momentary contact to close (B2 wiring) can be easily set, but requires the presence of either CPS-U, CPS-UN4, or CPS-EI safety devices. The operator is pre-wired to accept a sensing device, photoelectric control, radio controls and most types of access control equipment.
  • Operator/Motor Control: Solid-state Medium-Duty circuit board.
  • Control Circuit: 24V NEC Class 2.
  • Floor Level Disconnect: Floor level disconnect provides emergency manual operation.
  • Drive Reduction: Heavy-duty wormgear-in-oil-bath speed reducer.
  • Push Button Station: 3-button station for OPEN/CLOSE/STOP functions is standard for all operators. Controls with 1, 2 and 3 buttons are available.
  • Construction: NEMA 1 type electrical box with baked-on powder coat finish. Easily field converted for right or left mounting.
  • Radio Receiver: 315MHz radio receiver is integral to the Medium-Duty logic board. Accepts up to 20 Security+® remote controls and unlimited DIP switch remote controls.
  • Warranty: 2-year warranty.
  • Primary Monitored Entrapment Protection: The presence of primary entrapment protection is required for all modes and features beyond basic constant-pressure-to-close performance. Primary entrapment protection devices are monitored continuously to insure safe operation of the door and limit door operator functionality should an obstruction be detected or in the event of device failure. LiftMaster Monitored Entrapment Protection devices, CPS-U, CPS-UN4 and CPS-EI, are designed to work in conjunction with LiftMaster commercial door operators to provide enhanced door safety and a broad range of modes and features to end users. Either monitored photo-sensor or monitored 4-wire sensing edge (in conjunction with the CPS-EI Edge Interface) protection may be selected, but one must be detected by the LiftMaster Logic 4.0 or Medium-Duty Logic circuit board in order to unlock full functionality.
  • Ancillary Entrapment Protection: (optional) LiftMaster Retro-Reflective Commercial Protector System® photo sensors, 2-wire non-monitored sensing edges and pneumatic sensing edges are considered secondary entrapment protection and may be used to supplement primary entrapment protection or basic constant-pressure-to-close.
  • Radio Control: Universal transmitters and receivers are available to signal the operator to open and/or close.
  • Emergency Egress Device: Attractive face plate mounts flush to the wall and contains handle to disconnect operator from a grille, thereby allowing the grille to be opened manually or by spring tension.
  • Rolling Door Interlock Switch: Interlock switch disables the operator control circuit when a manual door lock is engaged preventing damage to the door and operator.

 

The post LiftMaster Opener MGJ appeared first on All Star Garage Door 901-240-7215 Garage Door & Spring Repair.

]]> LiftMaster Opener LGJ https://garage-door-repair-memphis.com/shop/commercial/operators-commercial/opener-lgj/ Wed, 20 Sep 2017 19:48:36 +0000 http://garage-door-repair-memphis.com/?post_type=product&p=16389 Jackshaft Operator

Light-Duty, for Rolling Grilles and Shutters

The post LiftMaster Opener LGJ appeared first on All Star Garage Door 901-240-7215 Garage Door & Spring Repair.

]]> Light-Duty Gear-Reduced Jackshaft Operator for Rolling Grilles and Shutters

Model LGJ is a light-duty gear-reduced jackshaft operator for rolling grilles and shutters.

It features an internal door lock sensing circuit, a compact design and a floor level disconnect.

  • Motor: Powerful 1/4 HP, 115V single phase motor with instant reverse and internal automatic reset thermal overload. Removable without affecting limit switch settings.
  • Wiring Type: The Model LGJ is easily wired for C2 or B2 wiring. The operator is pre-wired to accept a sensing device, photoelectric control, radio controls and most types of access control equipment.
  • Operator/Motor Control: Solid State Circuit (G2) with Door Lock Sensing Circuit (NEMA 1 enclosure).
  • Control Circuit: 24V NEC Class 2.
  • Floor Level Disconnect: Floor level disconnect provides emergency manual operation.
  • Drive Reduction: Heavy-duty wormgear-in-oil-bath speed reducer.
  • Push Button Station: 3-button station for OPEN/CLOSE/STOP functions is standard for all operators. Controls with one, two and three buttons are available.
  • Construction: NEMA 1 Type electrical box with durable baked-on powder coat finish. Easily converted for right or left mounting.
  • Door Lock Sensing Circuit: The Model LGJ includes a speed sensor in the electrical enclosure and a sensing circuit which sends a signal to stop the motor if the door jams, such as would be caused by failure to release the lockbar of a rolling grille before starting the operator. In addition to stopping the motor, if the door or grille is in fully closed position, it will drive the motor in the opposite direction for approximately 1 inch of door travel. This releases the pressure on the lock-bar thus allowing the lock to be easily opened.
  • Warranty: 2-year warranty.
  • Sensing Edge: (recommended) Designed to sense an obstruction and signal door operator to stop or reverse as desired. Either an electric or pneumatic sensing device can be added to bottom edge of door.
  • Radio Control: Universal transmitters and receivers are available to signal the operator to open and/or close door.
  • Emergency Egress Device: Attractive face plate mounts flush on wall and contains handle to disconnect operator from a grille, thereby allowing the grille to be opened manually or by spring tension.
  • Rolling Door Interlock Switch: Interlock switch disables the operator control circuit when a manual door lock is engaged preventing damage to the door and operator.
  • CPS® Commercial Protector System®: (recommended) A “non-contact” photo safety sensor designed to sense an obstruction and signal the door operator to reverse to open.
    • Safety of a non-contact infrared reversing sensor
    • Fast and easy-to-install
    • Patented electrical interface monitors system status at all times
    • LED indicators for quick alignment
    • One size fits all (for doors up to 30 ft. wide)

 

The post LiftMaster Opener LGJ appeared first on All Star Garage Door 901-240-7215 Garage Door & Spring Repair.

]]> LiftMaster Opener J https://garage-door-repair-memphis.com/shop/commercial/operators-commercial/opener-lmj/ Wed, 20 Sep 2017 19:41:41 +0000 http://garage-door-repair-memphis.com/?post_type=product&p=16388 Jackshaft Operator

Industrial-Duty, for Sectional Doors w/high or vertical lift, Rolling Doors, and Grilles

[av_button label='Download Brochure' link='manually,http://amarr.com/downloads/J_Industrial_Duty_Jackshaft_Operator_Brochure.pdf' link_target='_blank' size='small' position='left' icon_select='yes' icon_hover='aviaTBicon_hover' icon='ue82d' font='entypo-fontello' color='red' custom_bg='#444444' custom_font='#ffffff' admin_preview_bg='']

The post LiftMaster Opener J appeared first on All Star Garage Door 901-240-7215 Garage Door & Spring Repair.

]]> Industrial Duty Jackshaft Operator

Jackshaft (J) style commercial door operators are optimal for industrial applications.

Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.

The operators are typically mounted to the wall when used with smaller sectional overhead doors with a vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.

J operators are attached to the door jackshaft to indirectly drive the door.

  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone, tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device, ensuring the status of your commercial door.
  • MyQ Mobile App is a free download with no annual activation fee.
  • Security+ 2.0™ safeguards your facility – with every click, a new codeis sent to the commercial door operator so the door opens only for you.
  • UL 325 requires all commercial door operators to be either constant pressure to close or be equipped with a primary external monitored entrapment protection device.
  • DUAL VOLTAGE CONNECTIONS
    Increase flexibility by enabling the installer to select the required voltage, within phase, to meet job-site requirements.
    Within phases, voltage is selectable at the time of installation with the placement of a connector.
    • Single-Phase: 115V and 230V
    • 3-Phase: 208V, 230V and 460V
    • 575V is a discrete model without field-selectable voltage
  • FLOOR LEVEL DISCONNECT
    Enables manual lifting in an emergency.
  • CONTROL FUNCTION SELECTOR DIAL
    Enables easy selection and programming of (7) wiring types, from constant pressure to close, to specialized Timer-to-Close functionality to meet end-user needs.
  • TIMER-TO-CLOSE
    Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
  • CONTINUOUS-DUTY HIGH-STARTING TORQUE MOTOR
    Performs in demanding industrial overhead door applications.
  • MOTOR REMOVABLE WITHOUT AFFECTING LIMIT SWITCH SETTINGS
    Saves time and money for maintenance.
  • ADJUSTABLE FRICTION CLUTCH
    Helps to protect door and operator from damage should the door meet an obstruction.
  • MID-STOP
    Enables partial opening of door to a pre-programmed position for energy savings, time savings and convenience.
  • MAXIMUM RUN TIMER
    Reverses or stops door if closing time exceeds expected time-frame to limit damage to door and operator.
  • DELAY-ON-REVERSE CIRCUIT
    Prevents abrupt reversal of door, reducing wear on the door and operator system.
  • 3-BUTTON CONTROL STATION WITH MAINTENANCE ALERT SYSTEM (MAS)
    Provides open/close/stop functions and notification when routine maintenance is required.
  • SECURITY+ 2.0™ RADIO RECEIVER
    Standard on-board with Logic 5.0 operators. Accepts up to (90) single-button or (30) 3-Button remote controls plus up to (30) wireless keypads or an unlimited number of DIP switch remotes.
  • MOTOR
    Continuous-duty high-starting torque motor with instant reverse and overload protection. Available in 1/3, 1/2, 3/4 and 1 HP; single- or three-phase. Capacitor start on single-phase. Removable without affecting limit switch settings.
  • WIRING TYPE
    Operators are factory preset to C2 wiring, providing momentary contact to open and stop, with constant contact to close. Monitored entrapment protection, using approved photo sensors or sensing edges is optional, although recommended, when using C2, D1 or E2. All other wiring types, B2, T, TS and FSTS can be selected with the addition of an appropriately monitored entrapment protection device (LiftMaster® CPS-U photo eyes, LiftMaster OES monitored sensing edge, or a monitored sensing edge supported by the CPS-EI, as examples). Logic 5.0 operators can only accept UL-Approved LiftMaster monitored entrapment protection devices..
  • CONTROL CIRCUIT
    5V DC NEC Class 2.
  • DRIVE REDUCTION
    First-stage heavy-duty 5L V-belt; second-third-fourth stages #48 chain; #50 output sprocket chain.
  • BEARINGS
    Industrial ball bearings on 1″ output shaft, heavy-duty oil-filled bushings on reduction shafts.
  • BRAKE
    Standard on 3/4 and 1 HP operators.
    (optional on 1/2 HP; not available on 1/3 HP).
  • CONSTRUCTION
    NEMA 1 type electrical box, heavy-duty 11-gauge steel frame with durable powder coat finish, all reduction sprockets drilled and pinned to shafts.
  • WARRANTY
    Two Years.

 

The post LiftMaster Opener J appeared first on All Star Garage Door 901-240-7215 Garage Door & Spring Repair.

]]> LiftMaster Opener DJ https://garage-door-repair-memphis.com/shop/commercial/operators-commercial/opener-lmdj/ Wed, 20 Sep 2017 19:19:15 +0000 http://garage-door-repair-memphis.com/?post_type=product&p=16384 Jackshaft Operator

Industrial-Duty, for Rolling Doors & Grilles

[av_button label='Download Brochure' link='manually,http://amarr.com/downloads/DJ_Door_Lock_Jackshaft_Operator_Brochure.pdf' link_target='_blank' size='small' position='left' icon_select='yes' icon_hover='aviaTBicon_hover' icon='ue82d' font='entypo-fontello' color='red' custom_bg='#444444' custom_font='#ffffff' admin_preview_bg='']

The post LiftMaster Opener DJ appeared first on All Star Garage Door 901-240-7215 Garage Door & Spring Repair.

]]> Industrial-Duty Jackshaft Operator with Internal Door Lock Sensor

Door Lock Jackshaft (DJ) style commercial door operators are ideal for shopping mall applications with lighter rolling doors and grilles.

Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.

These operators include a door lock sensor to prevent damage to the door and operator caused by attempts to automatically open a locked door.

The operators are typically mounted to the wall when used with smaller sectional overhead doors with vertical or high lift and mounted to the side, or the front of the hood, when used with rolling doors and grilles.

DJ operators are attached to the door jackshaft to indirectly drive the door.

  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone, tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device, ensuring the status of your commercial door.
  • MyQ Mobile App is a free download with no annual activation fee.
  • Security+ 2.0™ safeguards your facility – with every click, a new code is sent to the commercial door operator so the door opens only for you.
  • UL 325 requires all commercial door operators to be either constant pressure to close or be equipped with a primary external monitored entrapment protection device.
  • DUAL VOLTAGE CONNECTIONS
    Increase flexibility by enabling the installer to select the required voltage, within phase, to meet job-site requirements.
    Within phases, voltage is selectable at the time of installation with the placement of a connector.
    • Single-Phase: 115V and 230V
    • 3-Phase: 208V, 230V and 460V
    • 575V is a discrete model without field-selectable voltage
  • INTERNAL DOOR LOCK SENSOR
    Eliminates jamming and damage to door and operator if door is opened when locked.
  • FLOOR LEVEL DISCONNECT
    Enables manual lifting in an emergency.
  • CONTROL FUNCTION SELECTOR DIAL
    Enables easy selection and programming of (7) wiring types, from constant pressure to close, to specialized Timer-to-Close functionality to meet end-user needs.
  • TIMER-TO-CLOSE
    Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace
    of mind.
  • CONTINUOUS-DUTY HIGH-STARTING TORQUE MOTOR
    Performs in demanding industrial overhead and rolling door applications.
  • MOTOR REMOVABLE WITHOUT AFFECTING LIMIT SWITCH SETTINGS
    Saves time and money for maintenance.
  • ADJUSTABLE FRICTION CLUTCH
    Helps to protect door and operator from damage should the door meet an obstruction.
  • MID-STOP
    Enables partial opening of door to a pre-programmed position for energy savings, time savings and convenience.
  • MAXIMUM RUN TIMER
    Reverses or stops door if closing time exceeds expected time-frame to limit damage to door and operator.
  • DELAY-ON-REVERSE CIRCUIT
    Prevents abrupt reversal of door, reducing wear on the door and operator system.
  • SECURITY+ 2.0™ RADIO RECEIVER
    Standard on-board with Logic 5.0 operators. Accepts up to (90) single-button or (30) 3-Button remote controls plus up to (30) wireless keypads or an unlimited number of DIP switch remotes.
  • MOTOR
    Continuous-duty high-starting torque motor with instant reverse and overload protection. Available in 1/2 and 3/4 HP; single- or three-phase. Capacitor start on single-phase. Removable without affecting limit switch settings.
  • WIRING TYPE
    Operators are factory preset to C2 wiring, providing momentary contact to open and stop, with constant contact to close. Monitored entrapment protection, using approved photo sensors or sensing edges is optional, although recommended, when using C2, D1 or E2. All other wiring types, B2, T, TS and FSTS can be selected with the addition of an appropriately monitored entrapment protection device (LiftMaster® CPS-U photo eyes, LiftMaster OES monitored sensing edge, or a monitored sensing edge supported by the CPS-EI, as examples). Logic 5.0 operators can only accept UL-Approved LiftMaster monitored entrapment protection devices.
  • CONTROL CIRCUIT
    5V DC NEC Class 2.
  • DRIVE REDUCTION
    First-stage heavy-duty 5L V-belt; second-third-fourth stages #48 chain; #50 output sprocket chain.
  • BEARINGS/BUSHINGS
    Industrial ball bearings on a 1″ output shaft; heavy-duty oil-filled bushings on reduction shafts.
  • BRAKE
    Standard on 3/4 HP operators (optional on 1/2 HP).
  • CONSTRUCTION
    NEMA 1 type electrical box, heavy-duty 11-gauge steel frame with durable powder coat finish, all reduction sprockets drilled and pinned to shafts.
  • WARRANTY
    Two Years.

 

The post LiftMaster Opener DJ appeared first on All Star Garage Door 901-240-7215 Garage Door & Spring Repair.

]]> LiftMaster Opener 3950 https://garage-door-repair-memphis.com/shop/commercial/operators-commercial/opener-lm3950/ Wed, 20 Sep 2017 17:23:24 +0000 http://garage-door-repair-memphis.com/?post_type=product&p=16379 Jackshaft Operator

Light-Duty, for Limited commercial rolling sheet applications only

 

The post LiftMaster Opener 3950 appeared first on All Star Garage Door 901-240-7215 Garage Door & Spring Repair.

]]> Jackshaft Door Operator for Commercial Rolling Sheet Door Applications

Model 3950 is a jackshaft operator for commercial rolling sheet door applications – ideal for self-storage facilities.

It features a compact design ideal for public, boat, and RV storage facilities.

It may be used on commercial rolling sheet doors with live or dead shaft measuring up to 12 ft. high and up to 14 ft. wide, but not exceeding 650 lbs.

  • Motor: Heavy-duty 24VDC motor provides ultra-quiet operation, along with variable speed smooth start and stop.
  • Compact Design: Wall-mount installation – mounts on left or right side of door using standard mounting brackets. An optional mounting bracket, 3950MB (see below), provides additional mounting flexibility either inside or outside the door opening.
  • Installation Flexibility: Comes standard with both live and dead shaft sprocketing.
  • Push Button Station: 1 APBS1 single push button station for OPEN & CLOSE functions with type B2 control wiring is standard for all operators. Controls with 1, 2 and 3 buttons are available.
  • The Protector System® Safety Sensors: A “non-contact” photo safety sensor designed to sense an obstruction and signal the door operator to reverse to open.
  • Warranty: 2-year warranty.
  • Chain Guard (with Mounting Clip): Provides added safety. Required for applications where the 3950 operator is mounted less than 8 ft. from the floor.
  • Mounting Bracket / Dead Shaft Sprocket Kit for #41 Chain:Provides further installation flexibility for new or retrofit applications.
  • Power Door Lock: Prevents the door from being manually forced open once fully closed.
  • EverCharge® Standby Power System: Operates the door operator for up to 20 full cycles within a 24 hour period.
  • Remote Work Light: Adds 200 watts of light with adjustable light time delay; unlimited number of lights can be added.

 

The post LiftMaster Opener 3950 appeared first on All Star Garage Door 901-240-7215 Garage Door & Spring Repair.

]]> LiftMaster Opener 3900 https://garage-door-repair-memphis.com/shop/commercial/operators-commercial/opener-lm3900/ Wed, 20 Sep 2017 17:15:12 +0000 http://garage-door-repair-memphis.com/?post_type=product&p=16377 Jackshaft Operator
Light duty, limited commercial sectional applications only

The post LiftMaster Opener 3900 appeared first on All Star Garage Door 901-240-7215 Garage Door & Spring Repair.

]]> Light-Duty Commercial Jackshaft Operator for Sectional Doors

Model 3900 is a light-duty jackshaft operator for light-duty commercial sectional applications only.
It features a compact design ideal for limited height, cathedral, or obstructed ceiling installations.
It may be used on standard and high-lift (maximum 7 ft. high-lift) sectional doors measuring up to 14 ft. high and up to 18 ft. wide, but not exceeding 180 sq. ft. or 650 lbs.

  • Motor: Heavy-duty 24VDC motor provides ultra-quiet operation, along with variable speed smooth start and stop.
  • Compact Design: Ideal for limited height, cathedral, or obstructed ceiling installations; mounts on the left or right side of door and attaches to the torsion bar.
  • Push Button Station: 1-button station for OPEN & CLOSE functions with type B2 control wiring is standard for all operators. Controls with 1, 2 and 3 buttons are available.
  • The Protector System® Safety Sensors: A “non-contact” photo safety sensor designed to sense an obstruction and signal the door operator to reverse to open.
  • Warranty: Lifetime motor warranty.
  • Power Door Lock: Prevents the door from being manually forced open once fully closed.
  • EverCharge® Standby Power System: Operates the door operator for up to 20 full cycles within a 24 hour period.
  • Alternate Mounting Kit: Allows operator to be mounted below the torsion bar.
  • Remote Work Light: Adds 200 watts of light with adjustable light time delay; unlimited number of lights can be added.
  • Keyless Entry: Allows door to open or close by using a code programmed directly into the unit.

 

The post LiftMaster Opener 3900 appeared first on All Star Garage Door 901-240-7215 Garage Door & Spring Repair.

]]>